|
|
|
|
|
|
|
|
|
|
|
|
|
|
1
|
Used for testing pH of furnace water.
|
Rubber Clamp accessory for holding cleaning tools. Includes one clamp. Mounts with bolts or screws (not included). Size: .63" - 1.38"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rubber Clamp accessory for holding cleaning tools. Includes one clamp. Mounts with bolts or screws (not included). Size: 1.00" - 2.25"
|
Fuse, 5-A
|
100% Silicone adhesive. Rated to 500˚F. Black Silicone Adhesive to be used when attaching a new door seal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
100% Silicone adhesive. High temperature Bronze Silicone Adhesive to be used when attaching a new door seal.
|
Used to submit required water samples for Titanium model furnaces. Each kit includes two bottles, two shipping boxes and two generic mailing labels. Includes instructions.
|
CAN Solution, 1 oz
Note regarding shipping: Chemical products cannot be shipped via USPS Priority Mail. Please choose UPS Ground shipping method upon checkout.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ferroin Indicator, 0.75 oz
Note regarding shipping: Chemical products cannot be shipped via USPS Priority Mail. Please choose UPS Ground shipping method upon checkout.
|
Attached to Cleaning Rod (p/n 9439) for cleaning the refractory slot.
|
Measures accurately the moisture level of wood with a range of 6% - 42%, and the ambient temperature (°C/°F). Mini in size and portable for field works, very easy to operate and delivers accurate readings instantly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleaning Rod tool used to clean the burn chamber on Maxim models.
|
4-Quart galvanized Ash Scoop is ideal for cleaning ashes from furnace.
|
Test Kit and replacement items for testing your furnace water ONLY if treated with MolyArmor 350 Corrosion Inhibitor. Complete kit includes moly test strips and litmus paper test strips.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grounding Rod Kit, used to electronically ground the furnace.
|
Socket, 5-A
|
Water Test Kits and replacement items for testing your furnace water ONLY if treated with 1650XL and MolyBoost. Complete kits include pH test strips.
Note regarding shipping: Chemical products cannot be shipped via USPS Priority Mail. Please choose UPS Ground shipping method upon checkout.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cleaning Rod tool used to clean the firebox on E-Classic, Classic Edge models.
|
1650XL Inhibitor Plus corrosion inhibitor protects the water jacket and system parts from corrosion. The polymer solution helps protect exchangers and pumps against solids adhering to system parts. Refer to the Owner's Manual for recommended treatment amounts. Note that 1 unit = 1 gallon.
|
Heat Exchanger Scraper is used to clean the flue passageways of E-Classic model 1450.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat Exchanger Scraper is used to clean the flue passageways of E-Classic model 3200.
|
CS-25 Alkalinity Builder is an additive for increasing the alkalinity (pH) of systems that have been treated with propylene glycol antifreeze if MolyArmor 350 has achieved 350+ ppm moly but the pH of the treated system water is lower than 8.0.
Note regarding shipping: Chemical products cannot be shipped via USPS Priority Mail. Please choose UPS Ground shipping method upon checkout.
|
Reduces mineral deposits in boiler side of water-to=water heat exchangers. Can be used as a preventative when filling the furnace or as a rescue treatment if corrosion occurs in the water jacket due to improperly maintained Corrosion Inhibitor levels. Note that 1 unit = 1 gallon.
PREVENTATIVE IN HARD WATER: While it is best to use softened water when filling the furnace, Sludge Conditioner should be used if the water quality is known to contain higher concentrations of minerals or solids.
RESCUE TREATMENT FOR CORROSION: If a furnace has been subjected to low Corrosion Inhibitor levels and corrosion is evident in the water jacket, Sludge Conditioner can be used by circulating through the furnace for one week to help clean some of the corrosion from inside the water jacket before flushing and refilling.
Note regarding shipping: Chemical products cannot be shipped via USPS Priority Mail. Please choose UPS Ground shipping method upon checkout.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to crimp terminals. For 14-24 AWG wires.
|
Torch design allows easy starting of the fire in Classic Edge, E-Classic and Maxim models.
|
Remote inline monitoring of water temperature (battery operated). Includes LCD, 75 feet of cord and probe. Dip switch can be set to either Fahrenheit or Celsius. NOTE: Black Tee (p/n 133) and Hex Bushing (p/n 180) are not included with the kit.
Replacement battery is AG13 alkaline button cell.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MolyArmor 350 Corrosion Inhibitor provides excellent corrosion protection when properly maintained and the moly level never drops below 350 ppm. It is easy to test for maintenance levels with a test strip (no messy chemicals for testing). One gallon of MolyArmor 350 Corrosion Inhibitor treats 200 gallons of system water. Use with Moly/pH Test Kit part number 2500598 for testing water. Two - 1 gallon bottles.
Note: do not mix this chemical with Central Boiler 1650XL Inhibitor Plus Corrosion Inhibitor. You will want to drain the water first and refill the furnace using the new chemical.
Note regarding shipping: Chemical products cannot be shipped via USPS Priority Mail. Please choose UPS Ground or Spee-dee shipping methods upon checkout.
|
Used as a furnace firebox pH modifier. Helps to neutralize acids that may form in the firebox. Box of 3.
|
For single use in filling water jacket, Water Softener Cartridge has 5,000 grains of removal capacity. For average water with 10 grains hardness, will treat 500 gallons water. May also be connected together to increase removal capacity.
|
|
|
