|
|
|
|
|
|
|
|
|
|
|
Replacement rope ring for chimneys. Door Seal Rope, 3/4", 1 foot length.
When ordering specify the length in feet. NOTE: Silicone is not included. Rope may be used for door seal or chimney transition box cover seal (each requires a 5-ft section) on a Maxim furnace. Also used on E-Classic 2300 Reaction Chamber door, heat exchanger access cover, and for the Fusion Combustor and insert.
|
6" chimney locking band clamp - should be used at each chimney section joint for securing pn 6500004.. Affected models: E-Classic 1450, Classic Edge 350/360/550/560, CleanFire 300/500, Forge 1500/3500 and Maxim 175/250/255 P/255 PE. Should be used as each joint.
|
8" chimney locking band clamp - should be used at each chimney section joint for securing pn 10508. Affected models: E-Classic 1400/2300/2400/3200/3250, Classic Edge 750/760/960, CleanFire 700/900, Classic 4030/5036/6048/7260 and Pallet Burner.
NOTE: Central Boiler sizes chimneys by their inside
diameter. A 6" chimney has a 6" inside diameter and an 8"
outside diameter. An 8" chimney has an 8" inside diameter and a
10" outside diameter. A 10" chimney has a 10" inside
diameter and a 12" outside diameter. When ordering a chimney part
for a Central Boiler furnace, be sure to use the Central Boiler designated chimney
size when ordering rather than the actual measurement. For example, when
ordering a chimney cap for a Classic 6048, even though the actual outside
diameter is 10”, order the 8” chimney cap. If you do not know the proper
size for chimney parts, please call first. All returns for incorrectly
ordered parts drop shipped from Central Boiler will incur return shipping and a
20% restocking fee.
|
|
|
|
|
|
|
|
|
|
|
|
|
Chimney Rain Cap, 8". To be used with Classic Models.
|
Replacement rope ring for chimneys. Rope Ring (only), 1.75" Low Density Braid, 6" I.D. Rope ring is used between chimney tee connector and furnace. Affected models: E-Classic 1450, Classic Edge 350/550/560 and Forge 1500/3500.
NOTE: Silicone is not included.
See technical specifications for applications for each furnace. When ordering p/n 7674 or 7594, note how many feet are needed and order accordingly.
|
Replacement chimney tee cover for 6" chimney tee (p/n 2500244 & 2500416). Affected models: E-Classic 1450, Classic Edge 350, 550 and Forge 1500, 3500.
NOTE: Central Boiler sizes chimneys by their inside
diameter. A 6" chimney has a 6" inside diameter and an 8"
outside diameter. An 8" chimney has an 8" inside diameter and a
10" outside diameter. A 10" chimney has a 10" inside
diameter and a 12" outside diameter. When ordering a chimney part
for a Central Boiler furnace, be sure to use the Central Boiler designated chimney
size when ordering rather than the actual measurement. For example, when
ordering a chimney cap for a Classic 6048, even though the actual outside
diameter is 10”, order the 8” chimney cap. If you do not know the proper
size for chimney parts, please call first. All returns for incorrectly
ordered parts drop shipped from Central Boiler will incur return shipping and a
20% restocking fee.
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement rope ring for chimneys. Rope Ring (only), 3/4" Medium Density Braid, 8" I.D. Replacement rope ring used below first chimney section attached to chimney tee connector. Affected models: E-Classic 1400/2300/2400/3200/3250, Classic 4030/5036/6048/7260, Pallet Burner and Classic Edge 750/760/960.
NOTE: Silicone is not included.
See technical specifications for applications for each furnace. When ordering p/n 7674 or 7594, note how many feet are needed and order accordingly.
|
Replacement rope ring for chimneys. Rope Ring (only), 2" Low Density Braid, 8" I.D. Rope ring is used between chimney tee connector and furnace. Affected models: E-Classic 1400/2300/2400/3200/3250, Classic 4030/5036/6048 and Classic Edge 750/760/960.
NOTE: Silicone is not included.
See technical specifications for applications for each furnace. When ordering part number 7674 or 7594, note how many feet are needed and order accordingly.
|
Replacement chimney slide cover for older model furnaces: CL17, CL40, CL4436, CL5648.
|
|
|
|
|
|
|
|
|
|
|
|
|
Chimney Rain Cap, 6" (see sizing note below), applicable to Central Boiler furnaces: Maxim M250/M255P/M255PE, Classic Edge 350/550 and E-Classic 1450. To be used with Chimney Extension (p/n 6500004). Also consider 6" Chimney Cap (p/n 2900342).
Part number 4082 was replaced by this part number.
NOTE: Central Boiler sizes chimneys by their inside
diameter. A 6" chimney has a 6" inside diameter and an 8"
outside diameter. An 8" chimney has an 8" inside diameter and a
10" outside diameter. A 10" chimney has a 10" inside
diameter and a 12" outside diameter. When ordering a chimney part
for a Central Boiler furnace, be sure to use the Central Boiler designated chimney
size when ordering rather than the actual measurement. For example, when
ordering a chimney cap for a Classic 6048, even though the actual outside
diameter is 10”, order the 8” chimney cap. If you do not know the proper
size for chimney parts, please call first. All returns for incorrectly
ordered parts drop shipped from Central Boiler will incur return shipping and a
20% restocking fee.
|
Replacement chimney tee cover for 8" chimney tee (part numbers 2500433 & 2500245). Affected models: E-Classic 1400, 2300, 2400, 3200, 3250, Classic Edge 750 and Classic 4030, 5036, 6048.
NOTE: Central Boiler sizes chimneys by their inside
diameter. A 6" chimney has a 6" inside diameter and an 8"
outside diameter. An 8" chimney has an 8" inside diameter and a
10" outside diameter. A 10" chimney has a 10" inside
diameter and a 12" outside diameter. When ordering a chimney part
for a Central Boiler furnace, be sure to use the Central Boiler designated chimney
size when ordering rather than the actual measurement. For example, when
ordering a chimney cap for a Classic 6048, even though the actual outside
diameter is 10”, order the 8” chimney cap. If you do not know the proper
size for chimney parts, please call first. All returns for incorrectly
ordered parts drop shipped from Central Boiler will incur return shipping and a
20% restocking fee.
|
Chimney Rain Cap, 8", E-Classic (exclude 1450), to be used with Chimney Extension (p/n 10508).
NOTE: Central Boiler sizes chimneys by their inside
diameter. A 6" chimney has a 6" inside diameter and an 8"
outside diameter. An 8" chimney has an 8" inside diameter and a
10" outside diameter. A 10" chimney has a 10" inside
diameter and a 12" outside diameter. When ordering a chimney part
for a Central Boiler furnace, be sure to use the Central Boiler designated chimney
size when ordering rather than the actual measurement. For example, when
ordering a chimney cap for a Classic 6048, even though the actual outside
diameter is 10”, order the 8” chimney cap. If you do not know the proper
size for chimney parts, please call first. All returns for incorrectly
ordered parts drop shipped from Central Boiler will incur return shipping and a
20% restocking fee.
|
|
|
|
|
|
|
|
|
|
|
|
|
6" (see sizing note below) Central Boiler Chimney Base Brace Kit used to reinforce the chimney base when three or more chimney sections are used.
NOTE: Central Boiler sizes chimneys by their inside
diameter. A 6" chimney has a 6" inside diameter and an 8"
outside diameter. An 8" chimney has an 8" inside diameter and a
10" outside diameter. A 10" chimney has a 10" inside
diameter and a 12" outside diameter. When ordering a chimney part
for a Central Boiler furnace, be sure to use the Central Boiler designated chimney
size when ordering rather than the actual measurement. For example, when
ordering a chimney cap for a Classic 6048, even though the actual outside
diameter is 10”, order the 8” chimney cap. If you do not know the proper
size for chimney parts, please call first. All returns for incorrectly
ordered parts drop shipped from Central Boiler will incur return shipping and a
20% restocking fee.
|
Replacement square chimney tee cover. Chimney Tee Cover (p/n 2000162) is for E-Classic 1450 models with serial number E102543 and earlier.
|
Replacement chimney slide cover for older model furnaces: CL75, CL7260, Pallet Burner. Part number 992-011 is included with kit 4218.
|
|
|
|
|
|
|
|
|
|
|
|
|
Attached to the outer casing of a 6" chimney to hold three guy-wires (not included). Recommended for chimneys exceeding the roof by 5' to 13' maximum.
This band is for chimney's with an inner dimension of 6" and a outer dimension of 8".
NOTE: Central Boiler sizes chimneys by their inside diameter. A 6" chimney has a 6" inside diameter and an 8" outside diameter. An 8" chimney has an 8" inside diameter and a 10" outside diameter. A 10" chimney has a 10" inside diameter and a 12" outside diameter. When ordering a chimney part for a Central Boiler furnace, be sure to use the Central Boiler designated chimney size when ordering rather than the actual measurement. For example, when ordering a chimney cap for a Classic 6048, even though the actual outside diameter is 10”, order the 8” chimney cap. If you do not know the proper size for chimney parts, please call first. All returns for incorrectly ordered parts drop shipped from Central Boiler will incur return shipping and a 20% restocking fee.
|
Chimney Tee Restrictor Kit is installed in chimney tee to lower the burn rate. For use only with Classic 4030, 5036 and 6048 models.
|
Chimney Band Clamp Kit, 6", reinforces strength between two sections of 6" chimney.
Note: 6" band clamps are for the Central Boiler 6" chimney which has an inside diameter of 6" and an outside diameter of 8".
|
|
|
|
|
|
|
|
|
|
|
|
|
Chimney Ring, 8" (see sizing note below). This is required for Classic furnaces with the square chimney box (requires welding to the furnace).
NOTE: Central Boiler sizes chimneys by their inside
diameter. A 6" chimney has a 6" inside diameter and an 8"
outside diameter. An 8" chimney has an 8" inside diameter and a
10" outside diameter. A 10" chimney has a 10" inside
diameter and a 12" outside diameter. When ordering a chimney part
for a Central Boiler furnace, be sure to use the Central Boiler designated chimney
size when ordering rather than the actual measurement. For example, when
ordering a chimney cap for a Classic 6048, even though the actual outside
diameter is 10”, order the 8” chimney cap. If you do not know the proper
size for chimney parts, please call first. All returns for incorrectly
ordered parts drop shipped from Central Boiler will incur return shipping and a
20% restocking fee.
|
8 " (see sizing note below) Chimney Base Brace Kit used to reinforce the chimney base when three or more chimney sections are used.
NOTE: Central Boiler sizes chimneys by their inside
diameter. A 6" chimney has a 6" inside diameter and an 8"
outside diameter. An 8" chimney has an 8" inside diameter and a
10" outside diameter. A 10" chimney has a 10" inside
diameter and a 12" outside diameter. When ordering a chimney part
for a Central Boiler furnace, be sure to use the Central Boiler designated chimney
size when ordering rather than the actual measurement. For example, when
ordering a chimney cap for a Classic 6048, even though the actual outside
diameter is 10”, order the 8” chimney cap. If you do not know the proper
size for chimney parts, please call first. All returns for incorrectly
ordered parts drop shipped from Central Boiler will incur return shipping and a
20% restocking fee.
|
Chimney Band Clamp Kit reinforces strength between two sections of 8" chimney.
Note: 8" band clamps are for the Central Boiler 8" chimney which has an inside diameter of 8" and an outside diameter of 10".
|
|
|
|
|
|
|
|
|
|
|
|
|
8 " Chimney Guy-Wire Band Kit used to provide additional stability to chimneys in installations where property damage could occur within the fall zone of the chimney. Guy wire is not included in kit.
This band is for an 8" inner diameter chimney with an outer diameter of 10".
NOTE: Central Boiler sizes chimneys by their inside diameter. A 6" chimney has a 6" inside diameter and an 8" outside diameter. An 8" chimney has an 8" inside diameter and a 10" outside diameter. A 10" chimney has a 10" inside diameter and a 12" outside diameter. When ordering a chimney part for a Central Boiler furnace, be sure to use the Central Boiler designated chimney size when ordering rather than the actual measurement. For example, when ordering a chimney cap for a Classic 6048, even though the actual outside diameter is 10”, order the 8” chimney cap. If you do not know the proper size for chimney parts, please call first. All returns for incorrectly ordered parts drop shipped from Central Boiler will incur return shipping and a 20% restocking fee.
|
Chimney Attachment Ring, 6"/8", used with electrical conduit (not included) to reinforce chimney when five or more sections are used. For use on an interior or exterior wall, stabilizes chimney while providing clearance from combustible surface. Use of Chimney Attachment Rings at maximum intervals of 8' is recommended. Must be located directly below Chimney Locking Band (6" p/n 6500011; 8" p/n 10509) to reduce stress on the joint.
|
Chimney Conversion Adapter, 8". To be used with Classic Models.
|
|
|
|
|
|
|
|
|
|
|
|
|
New version chimney cap/spark arrestor provides better fit, features a snaplock clamp and screen that is secured with a clamp-on fastener for easy removal.
6" stainless steel spark arrestor chimney cap for chimney sections used on Maxim 175/250/255 P/255 PE models, E-Classic 1450 models, Classic Edge 350/550 models and Forge 1500/3500 models.
|
Chimney Support Brace Kit reinforces strength of chimney support when several chimney sections are used. For use only with Classic furnace models 4030, 5036, and 6048.
|
10" (see sizing note below) replacement chimney tee cover for part number 11605.
Affected models: Classic 7260 and Pallet Burner.
NOTE: Central Boiler sizes chimneys by their inside
diameter. A 6" chimney has a 6" inside diameter and an 8"
outside diameter. An 8" chimney has an 8" inside diameter and a
10" outside diameter. A 10" chimney has a 10" inside
diameter and a 12" outside diameter. When ordering a chimney part
for a Central Boiler furnace, be sure to use the Central Boiler designated chimney
size when ordering rather than the actual measurement. For example, when
ordering a chimney cap for a Classic 6048, even though the actual outside
diameter is 10”, order the 8” chimney cap. If you do not know the proper
size for chimney parts, please call first. All returns for incorrectly
ordered parts drop shipped from Central Boiler will incur return shipping and a
20% restocking fee.
|
|
|
|
|
|
|
|
|
|
|
|
|
New version chimney cap/spark arrestor provides better fit, features a snaplock clamp and screen that is secured with a clamp-on fastener for easy removal.
8" stainless steel spark arrestor chimney cap for chimney sections used on Classic/Pallet Burner models, E-Classic 1400/2300/2400/3200/3250 models and Classic Edge 750 models.
|
Replacement chimney tee support for Classic 4030, 5036 and 6048 furnaces.
|
Chimney Support Brace Kit reinforces strength of chimney support when several chimney sections are used. For use only with Classic furnace model 7260 and Pallet Burner.
|
|