|
|
|
|
|
|
|
|
|
|
|
PEX Adapter, 1/2" PEX x 1/2" Sweat Fittings. For adapting copper pipe to Central PEX pipe.
|
Female Adapter, 1/2" barb x 1/2 sweat fittings. Adapts 1/2" copper pipe to 1/2" Central PEX pipe. Sweat end fits over copper pipe.
|
Brass crimp plug for 1/2" PEX.
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass crimp plug for 1" PEX.
|
PEX Adapter, 1/2" PEX x 1/2" MIP Fittings. For adapting threaded pipe to Central PEX pipe.
|
Male Adapter, 3/4" sweat x 3/4" MIP fittings
|
|
|
|
|
|
|
|
|
|
|
|
|
PEX Adapter, 1/2" PEX x 1/2" FIP Fittings. For adapting copper pipe to Central PEX pipe.
|
Adapter, Brass, 3/4" female hose x 3/4" male pipe
|
Can be used with Stainless Steel Radiant Manifold Kits.
|
|
|
|
|
|
|
|
|
|
|
|
|
For adapting copper pipe to Central PEX tube.
|
For adapting threaded pipe to Central PEX pipe. PEX Adapter, Brass, 1" PEX x 3/4" MIP fittings
|
PEX Adapter, 1/2" PEX x 3/4" MIP Fittings. For adapting threaded pipe to Central PEX pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used with stainless steel radiant manifold kits. For use with 1/2" PEX-AL-PEX type piping. ONLY FOR ALUMINUM CORE PEX
|
Female Adapter, Copper, 3/4" sweat x 3/4" FIP fittings
|
Adapter, Brass, 3/4" male hose x 3/4" male pipe
|
|
|
|
|
|
|
|
|
|
|
|
|
For adapting threaded pipe to Central PEX pipe. PEX Adapter, Brass, 1" PEX x 1" MIP fittings
|
PEX 25mm stainless steel hose clamp.
|
For use with Stainless Steel Radiant Manifold Kits.
|
|
|
|
|
|
|
|
|
|
|
|
|
PEX Adapter, 1" PEX x 1" Sweat Fittings. For adapting copper pipe to Central PEX tube.
|
PEX Adapter, 25mm x 3/4" NPT Fittings. For adapting 1" PEX to 25mm PEX pipe.
|
Male Adapter, Copper, 1" sweat x 1" MPT fittings
|
|
|
|
|
|
|
|
|
|
|
|
|
The diverter tee is an excellent sweat fitting used mainly with fan-forced heaters.
|
1" stainless steel PEX 90° swoop (sweep) elbow.
|
Push-fit, Connector Straight, 3/4" x 3/4" MIP
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass adapter clamps for PEX pipe. Brass Clamp Adapter, 1"
|
Push-fit, Male Adapter, 1" x 3/4" MPT
|
Female Adapter, Copper, 1" sweat x 3/4" FIP fittings. May be used with Manifold p/n 1329 and 1349.
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass fittings for 1-1/4" PEX pipe. To ease installation, it is recommended that a heat gun be used on the 1-1/4" PEX pipe. Male Adapter, Brass, 1-1/4" barb x 1-1/4" MIP
Note: Central Boiler
lists its 1"
Pex products by their nominal outside diameters (the industry standard method),
but lists its 1-1/4" Pex products by their inside diameters. All Central Boiler fittings listed for 1-1/4"
Pex, including this product, are actually 1-1/2" Pex fittings. (The MIP side of this fitting is 1-1/4".) If this product will be used with Central
Boiler 1-1/4"
ThermoPEX or other Central Boiler branded 1-1/4" Pex line, then it will
fit. However, this fitting will not work
with industry-standard 1-1/4" Pex lines but will work with
1-1/2"
standard Pex lines.
|
Brass adapter clamps for PEX pipe. Brass Clamp Adapter, 1-1/4"
Note: Central Boiler
lists its 1"
Pex products by their nominal outside diameters (the industry standard method),
but lists its 1-1/4" Pex products by their inside diameters. All Central Boiler fittings listed for 1-1/4"
Pex, including this product, are actually 1-1/2" Pex fittings. (The MPT side of this fitting is 1-1/4".) If this product will be used with Central
Boiler 1-1/4"
ThermoPEX or other Central Boiler branded 1-1/4" Pex line, then it will
fit. However, this fitting will not work
with industry-standard 1-1/4" Pex lines but will work with
1-1/2"
standard Pex lines.
|
Natural Gas Orifice, .228" to convert Classic burner to NG
|
|