|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement hose clip for sight gauge tube. Please note, if you need all parts listed in the picture, they must be purchased separately. Use the parts listed for each part you require.
|
Replacement Fuse: The 3-A fuse is used for power disconnect on Classic Standard models. Also used if a side draft inducer is installed.
|
Replacement Fuse, 5-A for Dual Fuel Classic furnaces. Various Fuses and Fuse Holder protect solenoid from overload.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Fuse: The 1-A "slow blow" fuse is used to protect the door solenoid from overload on Classic & Pallet Burner models.
|
Sight Gauge Components replace original components. Dust Cap only. Please note, if you need all parts listed in the picture, they must be purchased separately. Use the parts listed for each part you require.
|
Replacement Fuse, 10-A, 250V, Lead Free for Pallet Burner furnace.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Price per foot for 7/8" braided door seal rope. When ordering specify the length in feet. NOTE: Silicone is not included.
|
Replacement sight gauge tube only (12" x 9/16" OD x 3/8" ID). Please note, if you need all parts listed in the picture, they must be purchased separately. Use the parts listed for each part you require.
Classic Edge models use 6" length. CleanFire models use 6" length. E-Classic 1450, 3200 & 3250 models use 6" length. E-Classic 1400, 2300 & 2400 models use 7" length. Forge 1500 & 3500 models use 9" length. Classic 4030, 5036, 6048 & 7260 models use 9" length. Pallet Burner models use 14" length.
|
Replacement spring for draft door soleniod linkage assembly used on Classic and Pallet Burner models.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Price per foot for door seal rope, 1".
NOTE: Silicone is not included.
|
Replacement Light Bulb (40 W) for furnaces.
|
Sight Gauge Components replace original components. Elbow only (1/4"). Please note, if you need all parts listed in the picture, they must be purchased separately. Use the parts listed for each part you require.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temperature Sensor Well used with digital temperature controllers (p/n 2000155 and 8320).
|
Replacement Bypass alarm switch for E-Classic IR models, Classic Edge 550/560/750/760/960 models; Replacement Gas Burner Switch for E-Classic IR/DF and Classic Dual Ready models.
|
Replaces door handle shouldered bolt on CL 4030 or CL 5036 milled cast firebox door with a bushing and bolt with longer threads.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Fuse Holder for Classic or Pallet Burner furnaces. Various Fuses and Fuse Holder protect solenoid from overload.
|
Snap Discs are Dual Fuel replacement snap discs. Part 4099 is the center disc. (p/n 5712 is for the left and right side discs)
Can be used with Classic or Maxim models
|
Replacement draft door lid for side draft on Classic CL 17 models (up to serial number 13427) with side draft and cast door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High Limit Switch opens on temperature rise.
|
Replacement Vent Cap for Classic and E-Classic outdoor furnaces helps prevent water loss through the vent pipe.
|
Replacement door switch for Pallet Burner Dual Ready models.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Rocker Switches for furnaces. Rocker Switch, Power Supply (on-off).
|
Replacement Rocker Switches for furnaces. Rocker Switch, Light Switch (on-off-on).
|
Replacement Vent Cap helps prevent water loss through the vent pipe and indicates water level. For M175 models only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement draft door lid for steel doors on Classic CL 17 & CL 40 models (up to serial number 13427) that do not have a side draft; has steel door.
|
Replacement draft door lid for side draft on Classic CL 40 models (up to serial number 13427) with side draft and cast door.
|
Snap Discs are Dual Fuel replacement snap discs. Part 5712 is for the left and right side discs, (p/n 5712 is the center disc).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Lens w/Gasket for furnaces.
|
Replacement water temperature sensor kit for Classic furnaces with a Digital Temperature Controller (p/n 2000155), Classic Edge HD (serial # starts with GF) and Classic Edge HDX models (serial # starts with GX).
Kit includes sensor and wire lead, mastic tape and instructions.
|
For use with older Classic models that do not have a fuse holder mounted on firebox door. Kit contains 1 amp fuse (x3), fuse holder, mounting bracket, soleniod jumper wire and instructions.
|
|
|
